Arduino Shield inalambrico ZigBee XBee

Arduino Shield inalambrico ZigBee XBee
Arduino Shield inalambrico ZigBee XBee
Arduino Shield inalambrico ZigBee XBee
Arduino Shield inalambrico ZigBee XBee
Arduino Shield inalambrico ZigBee XBee
Arduino Shield inalambrico ZigBee XBee
Arduino Shield inalambrico ZigBee XBee
 
Precio$69,000
CódigoArdWirelessShield
UbicaciónBogota
Stock: 0
SKUSKU0685
Local0K-04-01 No hay comentarios
 
Agotado
Arduino Shield inalambrico ZigBee XBee


Arduino Shield inalambrico ZigBee XBee


Arduino Shield inalambrico ZigBee XBee

Arduino Shield inalambrico para modulo ZigBee Xbee 

Ver Hoja Técnica.



Arduino Shield inalambrico ZigBee XBee

Arduino Shield inalambrico para modulo ZigBee Xbee 

Ver Hoja Técnica.



Guarde la lista de peticiones

Descripción Ver Hoja Técnica.

Nota: Este sistema es Original, hecho en Italia con componentes de alta calidad y con procesos de fabricacion certificados. No es un producto Chino, viene en caja original, y su número de serial en código de barras y mapa indicando que fue hecho en Italia.

The Wireless Proto shield allows an Arduino board to communicate wirelessly using a wireless module. It is based on the Xbee modules from Digi, but can use any module with the same footprint. The module can communicate up to 100 feet indoors or 300 feet outdoors (with line-of-sight). It can be used as a serial/usb replacement or you can put it into a command mode and configure it for a variety of broadcast and mesh networking options. The shields breaks out each of the Xbee's pins to a through-hole solder pad.
This shield doesn't have the SD socket.
An on-board switch allows the wireless module to communicate with the USB-to-serial converter or with the microcontroller.

Documentación:

EAGLE files: arduino_WirelessShield_Proto_v3-reference-design.zip

Schematic: arduino_WirelessShield_Proto_v3-schematic.pdf

 

Características

Networking
The Wireless Proto shield can be used with different modules with the same footprint as the XBee modules. The instructions below are for the XBee 802.15.4 modules (sometimes called "Series 1" to distinguish them from the Series 2 modules, although "Series 1" doesn't appear in the official name or product description) and also for the XBee ZNet 2.5 or XBee ZB modules, both known as "Series 2" modules. All the modules, basically have the same type of configuration parameters, but differ by the function that they implement and the topologies of networks that they can create. Only modules of the same family can communicate with each other.

Addressing
There are multiple parameters that need to be configured correctly for two modules to talk to each other (although with the default settings, all modules should be able to talk to each other). They need to be on the same network, as set by the ID parameter (see "Configuration" below for more details on the parameters). The modules need to be on the same channel, as set by the CH parameter. Finally, a module's destination address (DH and DL parameters) determine which modules on its network and channel will receive the data it transmits. This can happen in a few ways:
—If a module's DH is 0 and its DL is less than 0xFFFF (i.e. 16 bits), data transmitted by that module will be received by any module whose 16-bit address MY parameter equals DL.
—If DH is 0 and DL equals 0xFFFF, the module's transmissions will be received by all modules.
—If DH is non-zero or DL is greater than 0xFFFF, the transmission will only be received by the module whose serial number equals the transmitting module's destination address (i.e. whose SH equals the transmitting module's DH and whose SL equals its DL).

Again, this address matching will only happen between modules on the same network and channel. If two modules are on different networks or channels, they can't communicate regardless of their addresses.
For the "Series 2" modules you must chose which firmware to put on the module to give it Coordinator, Router or End Device functionality. Series 2 use only serial low (SL) and serial high (SH) for addressing.       

 Documentanción en sitio Arduino: Wireless Proto Shield

 

Por favor, revise estos otros productos:

 
Atmel ATMega2560 Tarjeta Arduino Compatible

Atmel ATMega2560 Tarjeta Arduino Compatible

Ver Hoja Técnica.

Precio: $59,500

click to see more

 
 
Arduino Leonardo Italiano con Headers
Ver

Arduino Leonardo con Headers genuino Italiano

Ver Hoja Técnica.



Precio: $62,000
Precio Normal: : $73,000

click to see more

 
 
Cable USB A a B 1metro
Ver Cable USB A a B de 1 metro Precio: $6,500

click to see more

 
 
Arduino Due Microcontrolador ARM

Arduino Due con Microcontrolador Atmel SAM3 ARM

Ver Hoja Técnica.

Precio: $169,000

click to see more

 
No recommended products at the moment.