Arduino Mega2560 Original Italiano

Arduino Mega2560 Original Italiano
Arduino Mega2560 Original Italiano
Arduino Mega2560 Original Italiano
Arduino Mega2560 Original Italiano
Arduino Mega2560 Original Italiano
Arduino Mega2560 Original Italiano
Arduino Mega2560 Original Italiano
 
PrecioPor favor contactenos
CódigoArduino Mega2560
UbicaciónBogota
Stock: 0
SKUSKU0684
Local0K-04-01 No hay comentarios
 
Agotado
Arduino Mega2560 Original Italiano


Arduino Mega2560 Original Italiano


Arduino Mega2560 Original Italiano

Arduino Mega2560 - Original Italiano

Ver Hoja Técnica.



Arduino Mega2560 Original Italiano

Arduino Mega2560 - Original Italiano

Ver Hoja Técnica.



Guarde la lista de peticiones

Descripción Ver Hoja Técnica.

Nota: Este sistema es Original, hecho en Italia con componentes de alta calidad y con procesos de fabricacion certificados. No es un producto Chino, viene en caja original, y su número de serial en código de barras y mapa indicando que fue hecho en Italia.

The Arduino Mega 2560 is a microcontroller board based on the ATmega2560 (datasheet). It has 54 digital input/output pins (of which 15 can be used as PWM outputs), 16 analog inputs, 4 UARTs (hardware serial ports), a 16 MHz crystal oscillator, a USB connection, a power jack, an ICSP header, and a reset button. It contains everything needed to support the microcontroller; simply connect it to a computer with a USB cable or power it with a AC-to-DC adapter or battery to get started. The Mega is compatible with most shields designed for the Arduino Duemilanove or Diecimila.

The Mega 2560 is an update to the Arduino Mega, which it replaces.

The Mega2560 differs from all preceding boards in that it does not use the FTDI USB-to-serial driver chip. Instead, it features the ATmega16U2 (ATmega8U2 in the revision 1 and revision 2 boards) programmed as a USB-to-serial converter.
Revision 2 of the Mega2560 board has a resistor pulling the 8U2 HWB line to ground, making it easier to put into DFU mode.
Revision 3 of the board has the following new features:

  • 1.0 pinout: added SDA and SCL pins that are near to the AREF pin and two other new pins placed near to the RESET pin, the IOREF that allow the shields to adapt to the voltage provided from the board. In future, shields will be compatible both with the board that use the AVR, which operate with 5V and with the Arduino Due that operate with 3.3V. The second one is a not connected pin, that is reserved for future purposes.
  • Stronger RESET circuit.
  • Atmega 16U2 replace the 8U2.

  

Características

Microcontroller-------------------------ATmega2560
Operating------------------------------Voltage5V
Input Voltage -------------------------(recommended) 7-12V
Input Voltage (limits)-----------------6-20V
Digital I/O----------------------------- Pins54 (of which 15 provide PWM output)
Analog Input Pins---------------------16
DC Current per I/O Pin---------------40 mA
DC Current for 3.3V Pin--------------50 mA
Flash Memory-------------------------256 KB of which 8 KB used by bootloader
SRAM----------------------------------8 KB
EEPROM-------------------------------4 KB
Clock Speed--------------------------16 MHz

 

Por favor, revise estos otros productos:

 
Atmel ATMega2560 Tarjeta Arduino Compatible

Atmel ATMega2560 Tarjeta Arduino Compatible

Ver Hoja Técnica.

Precio: $59,500

click to see more

 
 
Arduino Leonardo Italiano con Headers
Ver

Arduino Leonardo con Headers genuino Italiano

Ver Hoja Técnica.



Precio: $62,000
Precio Normal: : $73,000

click to see more

 
 
Cable USB A a B 1metro
Ver Cable USB A a B de 1 metro Precio: $6,500

click to see more

 
 
Arduino Due Microcontrolador ARM

Arduino Due con Microcontrolador Atmel SAM3 ARM

Ver Hoja Técnica.

Precio: $169,000

click to see more

 
No recommended products at the moment.