Regulador LDO de 5V 950mA SOT-223 LD1117S50TR

Regulador LDO de 5V 950mA SOT-223 LD1117S50TR
Regulador LDO de 5V 950mA SOT-223 LD1117S50TR
Regulador LDO de 5V 950mA SOT-223 LD1117S50TR
Regulador LDO de 5V 950mA SOT-223 LD1117S50TR
Regulador LDO de 5V 950mA SOT-223 LD1117S50TR
Regulador LDO de 5V 950mA SOT-223 LD1117S50TR
Regulador LDO de 5V 950mA SOT-223 LD1117S50TR
 
Precio$2,500
CódigoLD1117S50TR
UbicaciónBogota
Stock: 47
SKUSKU0149
Local0B-04-04 No hay comentarios
 
Regulador LDO de 5V 950mA SOT-223 LD1117S50TR


Regulador LDO de 5V 950mA SOT-223 LD1117S50TR


Regulador LDO de 5V 950mA SOT-223 LD1117S50TR

Regulador LDO de 5V 950mA SOT-223 LD111TS50



Regulador LDO de 5V 950mA SOT-223 LD1117S50TR

Regulador LDO de 5V 950mA SOT-223 LD111TS50



Guarde la lista de peticiones

Description Ver Hoja Técnica.

The LD1117 is a low drop voltage regulator able to provide up to 800 mA of output current, available even in adjustable version (VREF = 1.25 V). Concerning fixed versions, are offered the following output voltages: 1.2 V, 1.8 V, 2.5 V, 2.85 V, 3.0 V, 3.3 V and 5.0 V. The 2.85 V type is ideal for SCSI-2 lines active termination. The device is supplied in: SOT-223, DPAK, SO-8 and TO-220. The SOT-223 and DPAK surface mount packages optimize the thermal characteristics even offering a relevant space saving effect. High efficiency is assured by NPN pass transistor. In fact in this case, unlike than PNP one, the quiescent current flows mostly into the load. Only a very common 10 F minimum capacitor is needed for stability. On chip trimming allows the regulator to reach a very tight output voltage tolerance, within ± 1 % at 25 °C. The adjustable LD1117 is pin to pin compatible with the other standard. Adjustable voltage regulators maintaining the better performances in terms of drop and tolerance.

 

Features

–  Low dropout voltage (1 V typ.)
–  2.85 V device performances are suitable for SCSI-2 active termination
–  Output current up to 800 mA
–  Fixed output voltage of: 1.2 V, 1.8 V, 2.5 V, 3.0 V, 3.3 V, 5.0 V
–  Adjustable version availability (VREF = 1.25 V)
–  Internal current and thermal limit
–  Available in ± 1 % (at 25 °C) and 2 % in full temperature range
–  Supply voltage rejection: 75 dB (typ.)

No recommended products at the moment.
No recommended products at the moment.