Amplificador Operacional Dual tipo JFET LF353 SMD

Amplificador Operacional Dual tipo JFET LF353 SMD
Amplificador Operacional Dual tipo JFET LF353 SMD
Amplificador Operacional Dual tipo JFET LF353 SMD
Amplificador Operacional Dual tipo JFET LF353 SMD
Amplificador Operacional Dual tipo JFET LF353 SMD
Amplificador Operacional Dual tipo JFET LF353 SMD
Amplificador Operacional Dual tipo JFET LF353 SMD
 
Precio$1,300
CódigoLF353
UbicaciónBogota
Stock: 0
SKUSKU0140
Local0A-05-05 No hay comentarios
 
Agotado
Amplificador Operacional Dual tipo JFET LF353 SMD


Amplificador Operacional Dual tipo JFET LF353 SMD


Amplificador Operacional Dual tipo JFET LF353 SMD

Amplificador Operacional Dual tipo JFET LF353 Montaje Superficial



Amplificador Operacional Dual tipo JFET LF353 SMD

Amplificador Operacional Dual tipo JFET LF353 Montaje Superficial



Guarde la lista de peticiones

Descripcion General Ver Hoja Técnica.

These devices are low cost, high speed, dual JFET input operational amplifiers with an internally trimmed input offset voltage (BI-FETtechnology). They require low supply current yet maintain a large gain bandwidth product and fast slew rate. In addition, well matched high voltage JFET input devices provide very low input bias and offset currents. The LF353 is pin compatible with the standard LM1558 allowing designers to immediately upgrade the overall performance of existing LM1558 and LM358 designs. These amplifiers may be used in applications such as high speed integrators, fast D/A converters, sample and hold circuits and many other circuits requiring low input offset voltage, low input bias current, high input impedance, high slew rate and wide bandwidth. The devices also exhibit low noise and offset voltage drift.

Nota: Este integrado se vende en encapsulado de Montaje Superficial

Caracteristicas

- Internally trimmed offset voltage: 10 mV
- Low input bias current: 50pA
- Low input noise voltage: 25 25 Hz
- Low input noise current:0.01 Hz
- Wide gain bandwidth: 4 MHz
- High slew rate: 13 ¼s
- Low supply current: 3.6 mA
- High input impedance: 1012
- Low total harmonic distortion :  0.02%
- Low 1/f noise corner: 50 Hz
- Fast settling time to 0.01%: 2 ¼s

No recommended products at the moment.
No recommended products at the moment.