Acelerometro Analogico ADXL335

Acelerometro Analogico ADXL335
Acelerometro Analogico ADXL335
Acelerometro Analogico ADXL335
Acelerometro Analogico ADXL335
Acelerometro Analogico ADXL335
Acelerometro Analogico ADXL335
Acelerometro Analogico ADXL335
 
Precio$38,000
CódigoADXL335
UbicaciónBogota
Stock: 1
SKUSKU0880
Local0B-01-07 No hay comentarios
 
Acelerometro Analogico ADXL335


Acelerometro Analogico ADXL335


Acelerometro Analogico ADXL335

Acelerometro Analogo ADXL335 de tres ejes



Acelerometro Analogico ADXL335

Acelerometro Analogo ADXL335 de tres ejes



Guarde la lista de peticiones

Descripción

 Microelectrónicos trae este magnífico acelerómetro Analógico de tres ejes fabricado por Adafruit en Estados Unidos.  

We've updated our favorite triple-axis accelerometer to now have an on-board 3.3V regulator - making it a perfect choice for interfacing with a 5V microcontroller such as the Arduino. This breakout comes with 3 analog outputs for X, Y and Z axis measurements on a 0.75"x0.75" breakout board. The ADXL335 is the latest and greatest from Analog Devices, known for their exceptional quality MEMS devices. The VCC takes up to 5V in and regulates it to 3.3V with an output pin. The analog outputs are ratiometric: that means that 0g measurement output is always at half of the 3.3V output (1.65V), -3g is at 0v and 3g is at 3.3V with full scaling in between.

Fully assembled and tested. Comes with 8 pin 0.1" standard header in case you want to use it with a breadboard or perfboard. Two 2mm (0.08") mounting holes for easy attachment.

The XYZ filter capacitors are 0.1uF for a 50 Hz bandwidth

Ver la hoja de datos aca ADXL335 webpage for datasheets and more

 

Características

• Length:19mm/0.75in
• Width:19mm/0.75in
• Height:3.14mm/0.12in
• Weight:1.27g/0.04oz

 

 

No recommended products at the moment.
No recommended products at the moment.