Multiplexor/Demultiplexor 8 Canales CMOS 16-DIP

Multiplexor/Demultiplexor 8 Canales CMOS 16-DIP
Multiplexor/Demultiplexor 8 Canales CMOS 16-DIP
Multiplexor/Demultiplexor 8 Canales CMOS 16-DIP
Multiplexor/Demultiplexor 8 Canales CMOS 16-DIP
Multiplexor/Demultiplexor 8 Canales CMOS 16-DIP
Multiplexor/Demultiplexor 8 Canales CMOS 16-DIP
Multiplexor/Demultiplexor 8 Canales CMOS 16-DIP
 
Precio$950
CódigoCD4051
UbicaciónBogota
Stock: 53
SKUSKU0590
Local0G-02-04 No hay comentarios
 
Multiplexor/Demultiplexor 8 Canales CMOS 16-DIP


Multiplexor/Demultiplexor 8 Canales CMOS 16-DIP


Multiplexor/Demultiplexor 8 Canales CMOS 16-DIP

Multiplexor / Demultiplexor 8 canales CMOS 16 -DIP

Ver Hoja Técnica

Multiplexor/Demultiplexor 8 Canales CMOS 16-DIP

Multiplexor / Demultiplexor 8 canales CMOS 16 -DIP

Ver Hoja Técnica

Guarde la lista de peticiones

Descripción Ver Hoja Técnica

The CD4051BC, CD4052BC, and CD4053BC analog multiplexers/ demultiplexers are digitally controlled analog switches having low "ON” impedance and very low "OFF” leakage currents. Control of analog signals up to 15Vp-p can be achieved by digital signal amplitudes of 3−15V. For example, if VDD = 5V, VSS = 0V and VEE = −5V, analog signals from −5V to +5V can be controlled by digital inputs of 0−5V. The multiplexer circuits dissipate extremely low quiescent power over the full VDD−VSS and VDD−VEE supply voltage ranges, independent of the logic state of the control signals. When a logical "1” is present at the inhibit input terminal all channels are "OFF”. CD4051BC is a single 8-channel multiplexer having three binary control inputs. A, B, and C, and an inhibit input. The three binary signals select 1 of 8 channels to be turned"ON” and connect the input to the output. CD4052BC is a differential 4-channel multiplexer having two binary control inputs, A and B, and an inhibit input. The two binary input signals select 1 or 4 pairs of channels to be turned on and connect the differential analog inputs to the differential outputs.

 

Caracteristicas

- Wide range of digital and analog signal levels: digital 3 – 15V, analog to 15Vp-p
- Low "ON” resistance: 80Ω (typ.) over entire 15Vp-p signal-input range for VDD − VEE = 15V
- High "OFF” resistance: channel leakage of ±10 pA (typ.) at VDD − VEE = 10V
- Logic level conversion for digital addressing signals of 3 – 15V (VDD − VSS = 3 – 15V) to switch analog signals to 15 Vp-p (VDD − VEE = 15V)
- Matched switch characteristics: ΔRON = 5Ω (typ.) for VDD − VEE = 15V
- Very low quiescent power dissipation under all digital-control input and supply conditions: 1 μ W (typ.) at VDD − VSS = VDD − VEE = 10V

 

 

 

No recommended products at the moment.
No recommended products at the moment.