Driver Motor DC para Robotica 1A por CH

Driver Motor DC para Robotica 1A por CH
Driver Motor DC para Robotica 1A por CH
Driver Motor DC para Robotica 1A por CH
Driver Motor DC para Robotica 1A por CH
Driver Motor DC para Robotica 1A por CH
Driver Motor DC para Robotica 1A por CH
Driver Motor DC para Robotica 1A por CH
 
Precio$11,600
CódigoL293D
UbicaciónBogota
Stock: 6
SKUSKU0579
Local0A-02-02 No hay comentarios
 
Driver Motor DC para Robotica 1A por CH


Driver Motor DC para Robotica 1A por CH


Driver Motor DC para Robotica 1A por CH

Driver cuadrupe para motor DC o PP 1A por canal 16-DIP

Ver Hoja Técnica

Driver Motor DC para Robotica 1A por CH

Driver cuadrupe para motor DC o PP 1A por canal 16-DIP

Ver Hoja Técnica

Guarde la lista de peticiones

Descripción Ver Hoja Técnica

Nota Importante de Calidad: Microelectrónicos asegura 100% la calidad de este circuito integrado, el cual es original, fabricado por la compañia TEXAS INSTRUMENTS bajo procesos de calidad certificados. NO ha sido comprado en China en lotes rematados, excesos de inventarios, etc, Microelectrónicos ha adquirido este circuito integrado a través de sus canales legales de distribución en California - USA autorizados por el Fabricante .

The L293 and L293D are quadruple high-current half-H drivers. The L293 is designed to provide bidirectional drive currents of up to 1 A at voltages from 4.5 V to 36 V. The L293D is designed to provide bidirectional drive currents of up to 600-mA at voltages from 4.5 V to 36 V. Both devices are designed to drive inductive loads such as relays, solenoids, dc and bipolar stepping motors, as well as other high-current/high-voltage loads in positive-supply applications. All inputs are TTL compatible. Each output is a complete totem-pole drive circuit, with a Darlington transistor sink and a pseudo- Darlington source. Drivers are enabled in pairs, with drivers 1 and 2 enabled by 1,2EN and drivers 3 and 4 enabled by 3,4EN. When an enable input is high, the associated drivers are enabled, and their outputs are active and in phase with their inputs. When the enable input is low, those drivers are disabled, and their outputs are off and in the high-impedance state. With the proper data inputs, each pair of drivers forms a full-H (or bridge) reversible drive suitable for solenoid or motor applications.

 

Caracteristicas

- Featuring Unitrode L293 and L293D - Products Now From Texas Instruments
- Wide Supply-Voltage Range: 4.5 V to 36 V
- Separate Input-Logic Supply
- Internal ESD Protection
- Thermal Shutdown
- High-Noise-Immunity Inputs
- Functionally Similar to SGS L293 andSGS L293D
- Output Current 1 A Per Channel (600 mA for L293D)
- Peak Output Current 2 A Per Channel(1.2 A for L293D)
- Output Clamp Diodes for Inductive Transient Suppression (L293D)

 

 

 

 

No recommended products at the moment.
No recommended products at the moment.