Circuito Integrado Multiplexor Demultiplexor Analogo 4X1 4052

Circuito Integrado Multiplexor Demultiplexor Analogo 4X1 4052
Circuito Integrado Multiplexor Demultiplexor Analogo 4X1 4052
Circuito Integrado Multiplexor Demultiplexor Analogo 4X1 4052
Circuito Integrado Multiplexor Demultiplexor Analogo 4X1 4052
Circuito Integrado Multiplexor Demultiplexor Analogo 4X1 4052
Circuito Integrado Multiplexor Demultiplexor Analogo 4X1 4052
Circuito Integrado Multiplexor Demultiplexor Analogo 4X1 4052
 
Precio$2,200
Código74VHC4052DTR2G
UbicaciónBogota(G)
Stock: 0
SKUSKU0502
Local0A-04-03 No hay comentarios
 
Agotado
Circuito Integrado Multiplexor Demultiplexor Analogo 4X1 4052 Circuito Integrado Multiplexor Demultiplexor Analogo 4X1 4052 Circuito Integrado Multiplexor Demultiplexor Analogo 4X1 4052 Circuito Integrado Multiplexor Demultiplexor Analogo 4X1 4052
Guarde la lista de peticiones

Descripción Ver Hoja Técnica.

The MC74VHC4051, MC74VHC4052 and MC74VHC4053 utilize silicon−gate CMOS technology to achieve fast propagation delays, low ON resistances, and low OFF leakage currents. These analog multiplexers/demultiplexers control analog voltages that may vary across the complete power supply range (from VCC to VEE). The VHC4051, VHC4052 and VHC4053 are identical in pinout to the high−speed HC4051A, HC4052A and HC4053A, and the metal−gate MC14051B, MC14052B and MC14053B. The

Channel−Select inputs determine which one of the Analog Inputs/Outputs is to be connected, by means of an analog switch, to the Common Output/Input. When the Enable pin is HIGH, all analog switches are turned off. The Channel−Select and Enable inputs are compatible with standard CMOS outputs; with pullup resistors they are compatible with LSTTL outputs. These devices have been designed so that the ON resistance (Ron) is more linear over input voltage than Ron of metal−gate CMOS analog switches.

 

 

 

Características

• Fast Switching and Propagation Speeds
• Low Crosstalk Between Switches
• Diode Protection on All Inputs/Outputs
• Analog Power Supply Range (VCC − VEE) = 2.0 to 12.0 V
• Digital (Control) Power Supply Range (VCC − GND) = 2.0 to 6.0 V
• Improved Linearity and Lower ON Resistance Than Metal−Gate Counterparts
• Low Noise

No recommended products at the moment.
No recommended products at the moment.