Programador de Microcontroladores ATMEL USB ISP ATTiny

Programador de Microcontroladores ATMEL USB ISP ATTiny
Programador de Microcontroladores ATMEL USB ISP ATTiny
Programador de Microcontroladores ATMEL USB ISP ATTiny
Programador de Microcontroladores ATMEL USB ISP ATTiny
Programador de Microcontroladores ATMEL USB ISP ATTiny
Programador de Microcontroladores ATMEL USB ISP ATTiny
Programador de Microcontroladores ATMEL USB ISP ATTiny
 
Precio$45,000
CódigoUSBASP v2.0
UbicaciónBogota
Stock: 0
SKUSKU0492
No hay comentarios
 
Agotado
Programador de Microcontroladores ATMEL USB ISP ATTiny


Programador de Microcontroladores ATMEL USB ISP ATTiny


Programador de Microcontroladores ATMEL USB ISP ATTiny

Programador de Microcontroladores ATMEL USB ISP ATTiny

Ver Hoja Técnica.



Programador de Microcontroladores ATMEL USB ISP ATTiny

Programador de Microcontroladores ATMEL USB ISP ATTiny

Ver Hoja Técnica.



Guarde la lista de peticiones

Descripción Ver Hoja Técnica.

This programmer is based on Thomas Fischl's USBasp design and connects to your computer's USB port. Not only is it quite compact, but the design is really elegent. The USB interface is achieved by using an atmega processor and the rest is done in firmware.

- With 500mA over-current protection self-recovery fuse, and complete protection of expensive computer motherboard.
- Designed for notebook computers, special two 3.6V regulator, a perfect match to level, get rid of the instability of hardware hidden! Target board power mode jumper settings.
- The well-configured firmware, the speed of the unique adaptive technology, stability and obtain the best balance between speed! Supports firmware upgrade unlimited!
- USBasp is a USB in-circuit programmer for Atmel AVR controllers. It simply consists of an ATMega8 and a couple of passive
- components. The programmer uses a firmware-only USB driver, no special USB controller is needed.
- 500mA over-current protection with self-healing fuse, to protect expensive computer motherboard!
- Speed of adaptive technology
- Programming speed is up to 5kBytes/sec
- SCK option to support targets with low clock speed (< 1,5MHz)
- Powered by USB
- Standard 10-Pin ISP connector

 

 Descargue el Manual del Programador aca:  Guía del usuario del USBasp.pdf

 

 

Características

Microcontroladores soportados:

AVR Series:
ATTiny12(L)、ATTiny13(V)、ATTiny15(L)、ATTiny24(V)
ATTiny25(V)、ATTiny26(L)、ATTiny2313(V)、ATTiny44(V)
ATTiny45(V)、ATTiny84(V)、ATTiny85(V)、AT90S2313(L)、AT90S2323(L)
AT90S2343(L)、AT90S1200(L)、AT90S8515(L)、AT90S8535(L)
ATMEGA48(V)、ATMEGA8(L)、ATMEGA88(V)、ATMEGA8515(L)
ATMEGA8535(L)、ATMEGA16(L)、ATMEGA162(V)、ATMEGA163(L)
ATMEGA164(V)、ATMEGA165(V)、ATMEGA168(V)、ATMEGA169(V)
ATMEGA169P(V)、ATMEGA32(L)、ATMEGA324(V)、ATMEGA325(V)
ATMEGA3250(V)、ATMEGA329(V)、ATMEGA3290(V)、ATMEGA64(L)
ATMEGA640(V)、ATMEGA644(V)、ATMEGA645(V)、ATMEGA6450(V)
ATMEGA649(V)、ATMEGA6490(V)、ATMEGA128(L)、ATMEGA1280(V)
ATMEGA1281(V)、ATMEGA2560(V)、ATMEGA2561(V)、AT90CAN32
AT90CAN64、AT90CAN128、AT90PWM2(B)、AT90PWM3(B) etc.

No recommended products at the moment.
No recommended products at the moment.