Conector mini USB a PCB

Conector mini USB a PCB
Conector mini USB a PCB
Conector mini USB a PCB
Conector mini USB a PCB
Conector mini USB a PCB
Conector mini USB a PCB
Conector mini USB a PCB
 
Precio$4,400
CódigoH2959CT
UbicaciónBogota
Stock: 0
SKUSKU0047
Local0C-09-06 No hay comentarios
 
Agotado
Conector mini USB a PCB


Conector mini USB a PCB


Conector mini USB a PCB

Conector mini USB a PCB H2959CT

 



Conector mini USB a PCB

Conector mini USB a PCB H2959CT

 



Guarde la lista de peticiones

Especificaciones

1. Certified to perform as required in USB 2.0 Standard Tested and certified by USB Association approved laboratory the
connectors will perform at transmission speeds up to 480Mbps.
2. Designed for Low Skew performance The distance between twisted pairs conductors (i.e., contact nos. 2 and 3) is of equal electrical length, for receptacle and plug, resulting in zero theoretical skew.
3. Controlled Termination of Individual Conductors. The termination part of the contact is firmly attached in the molded
insulator body. Hirose's Electric unique design of the metal shield prevents short circuits, allowing the overmold resin to flow in the terminated area. By not using heat shrinkable tubing (or any other additional process), the non-twisted part of the conductors is very short, suppressing any unwanted impedance disturbances in the termination area.
4. Ease of mating and handling. Thin design of the plug assembly and the overmold section allows use in small spaces. The plug also incorporates a build-in snap-lock feature, providing tactile verification of the full and secure mating of plug and receptacle.
5. Two types of metal shields. Two styles of the receptacle metal shield are available, depending on the customer's PCB design requirement:
-Surface Mount Termination
-Solder Dip Type
6. Printed Circuit Board placement features.Precise location on the board can be accomplished using receptacle assemblies with or without the positioning boss.
7. Board placement with Automatic Equipment Receptacle assemblies are provided with a heat resistant flat surfaces, removable after completion of the soldering process and are supplied on the reels.
8. RoHS Compliant. All components and materials comply with the requirements of the EU Directive 2002/95/EC.
9. Support of Non-halogen Cable Wiring harness can be arranged in non-halogen cable types.
Note: Non-halogen items are not covered in the current USB 2.0 Standard.

 

Aplicaciones
 
 

Personal and mobile computer peripheral equipment, data terminals, digital cameras, MP3 players, PDA's, GPS
and other devices utilizing standard USB protocols.

No recommended products at the moment.
No recommended products at the moment.