Convertidor de UART a I2C SPI

Convertidor de UART a I2C SPI
Convertidor de UART a I2C SPI
Convertidor de UART a I2C SPI
Convertidor de UART a I2C SPI
Convertidor de UART a I2C SPI
Convertidor de UART a I2C SPI
Convertidor de UART a I2C SPI
 
Precio$13,200
CódigoSC16IS750IPW128
UbicaciónBogota
Stock: 2
SKUSKU0431
Local0A-08-04 No hay comentarios
 
Convertidor de UART a I2C SPI


Convertidor de UART a I2C SPI


Convertidor de UART a I2C SPI

Convertidor de UART a I2C SPI SC16IS750IPW128

Ver Hoja Técnica.



Convertidor de UART a I2C SPI

Convertidor de UART a I2C SPI SC16IS750IPW128

Ver Hoja Técnica.



Guarde la lista de peticiones

Features Ver Hoja Técnica.

The SC16IS740/750/760 is a slave I2C-bus/SPI interface to a single-channel high performance UART. It offers data rates up to 5 Mbit/s and guarantees low operating and sleeping current. The SC16IS750 and SC16IS760 also provide the application with 8 additional programmable I/O pins. The device comes in very small HVQFN24, TSSOP24 (SC16IS750/760) and TSSOP16 (SC16IS740) packages, which makes it ideally suitable for handheld, battery operated applications. This family of products enables seamless protocol conversion from I2C-bus or SPI to and RS-232/RS-485 and are fully bidirectional.
The SC16IS760 differs from the SC16IS750 in that it supports SPI clock speeds up to 15 Mbit/s instead of the 4 Mbit/s supported by the SC16IS750, and in that it supports IrDA SIR up to 1.152 Mbit/s. In all other aspects, the SC16IS760 is functionally and electrically the same as the SC16IS750. The SC16IS740 is functionally and electrically identical to the SC16IS750, with the exception of the programmable I/O pins which are only present on the SC16IS750.
The SC16IS740/750/760’s internal register set is backward-compatible with the widely used and widely popular 16C450. This allows the software to be easily written or ported from another platform. The SC16IS740/750/760 also provides additional advanced features such as auto hardware and software flow control, automatic RS-485 support, and software reset. This allows the software to reset the UART at any moment, independent of the hardware reset
signal.


Especificaciones Técnicas

- Single full-duplex UART
- Selectable I2C-bus or SPI interface
- 3.3 V or 2.5 V operation
- Industrial temperature range: -40 C to +95 C
- 64 bytes FIFO (transmitter and receiver)
- Fully compatible with industrial standard 16C450 and equivalent
- Baud rates up to 5 Mbit/s in 16X clock mode
- Auto hardware flow control using RTS/CTS
- Auto software flow control with programmable Xon/Xoff characters
- Single or double Xon/Xoff characters
- Automatic RS-485 support (automatic slave address detection).

No recommended products at the moment.
No recommended products at the moment.