Microcontrolador MSP430 G2402IN20 16Bit 8Kb 20DIP

Microcontrolador MSP430 G2402IN20 16Bit 8Kb 20DIP
Microcontrolador MSP430 G2402IN20 16Bit 8Kb 20DIP
Microcontrolador MSP430 G2402IN20 16Bit 8Kb 20DIP
Microcontrolador MSP430 G2402IN20 16Bit 8Kb 20DIP
Microcontrolador MSP430 G2402IN20 16Bit 8Kb 20DIP
Microcontrolador MSP430 G2402IN20 16Bit 8Kb 20DIP
Microcontrolador MSP430 G2402IN20 16Bit 8Kb 20DIP
 
Precio$12,000
CódigoMSP430G2402IN20
UbicaciónBogota
Stock: 9
SKUSKU0407
Local0A-01-07 No hay comentarios
 
Microcontrolador MSP430 G2402IN20 16Bit 8Kb 20DIP


Microcontrolador MSP430 G2402IN20 16Bit 8Kb 20DIP


Microcontrolador MSP430 G2402IN20 16Bit 8Kb 20DIP

Microcontrolador MSP430G2402IN20 16Bit 8Kb 20DIP

Ver Hoja Técnica.



Microcontrolador MSP430 G2402IN20 16Bit 8Kb 20DIP

Microcontrolador MSP430G2402IN20 16Bit 8Kb 20DIP

Ver Hoja Técnica.



Guarde la lista de peticiones

Descripción Ver Hoja Técnica.

The Texas Instruments MSP430™ family of ultra-low-power microcontrollers consist of several devices featuring different sets of peripherals targeted for various applications. The architecture, combined with five low-power modes is optimized to achieve extended battery life in portable measurement applications. The device features a powerful 16-bit RISC CPU, 16-bit registers, and constant generators that contribute to maximum code efficiency. The digitally controlled oscillator (DCO) allows wake-up from low-power modes to active mode in less than 1 μs.
The MSP430G2x32 and MSP430G2x02 series of microcontrollers are ultra-low-power mixed signal microcontrollers with built-in 16-bit timers, and up to 16 I/O touch sense enabled pins and built-in communication capability using the universal serial communication interface. The MSP430G2x32 series have a 10-bit A/D converter. For configuration details, see Table 1. Typical applications include low-cost sensor systems that capture analog signals, convert them to digital values, and then process the data for display or for transmission to a host system..

 

Caracteristicas

- Low Supply Voltage Range: 1.8 V to 3.6 V • Up to 16 Touch-Sense Enabled I/O Pins
- Ultra-Low Power Consumption • Universal Serial Interface (USI) Supporting SPI
- Active Mode: 220 μA at 1 MHz, 2.2 V and I2C
- Standby Mode: 0.5 μA • 10-Bit 200-ksps Analog-to-Digital (A/D)
- Off Mode (RAM Retention): 0.1 μA Converter With Internal Reference, Sampleand- Hold, and Autoscan (MSP430G2x32 Only)
- Five Power-Saving Modes
- Brownout Detector
- Ultra-Fast Wake-Up From Standby Mode in
- Less Than 1 μs • Serial Onboard Programming,
- No External Programming Voltage Needed,
- 16-Bit RISC Architecture, 62.5-ns Instruction Programmable Code Protection by Security Cycle Time Fuse
- Basic Clock Module Configurations • On-Chip Emulation Logic With Spy-Bi-Wire
- Internal Frequencies up to 16 MHz With Interface
- Four Calibrated Frequencies • Family Members are Summarized in Table 1
- Internal Very-Low-Power Low-Frequency • Package Options(LF)
- 32-kHz Crystal
- PDIP: 20 Pin
- External Digital Clock Source
- One 16-Bit Timer_A With Three Capture/Compare Registers


No recommended products at the moment.
No recommended products at the moment.